LoRa experience in a real city environment

Lora-300x171I was looking for a real LoRaWan experimentation on the field, not only a given open field performance where the result do not match the reality.

For this reason, I installed a Kerlink gateway on a friend’s balcony living on a high part of my city. Then I moved a tracker reporting its GPS position on regular basis and day after day I built a map of the area covered by this antenna.

This post details the results of this expermientation

The following map shows the result of this test :

LoRa in Clermont-Ferrand coverage map with a single antenna

LoRa in Clermont-Ferrand coverage map with a single antenna

Clermont-Ferrand is a city with mountains all around, for this reason the western coverage and the northern coverage are really limited but the eastern and south-eastern zone are more opened and the coverage is much more higher.

This map show this performance obtained with an antenna not optimized in the device and a base-station antenna in a good situation but not as well as for a public operator.

The device was communicating at 6Kbps and the 10,6km max distance could be longer if I was testing in a larger perimeter.

The points on the middle of the city are, for most of them, obtained in a dense city area with home having large rock walls, some in small road like old style city canyon.

The missing information at this point is the loss ratio, I’ll publish these information as soon as I will compute them.

That said I’m really happy of such nice results and performance obtained with LoRaWan. It was to understand/demonstrate the capability to deploy city-wide IoT application using a single gateway point.

7 thoughts on “LoRa experience in a real city environment

  1. Nice works. I am interested in this technology, but do not have a use case that justifies the cost at this time.
    I always take the manufacturers claimed ranges with a pinch of salt, so it is great to see you test them.

  2. Very interesting results !
    Would you share some more information on conditions of testing – height and dBi of BST antenna, end node and its antenna ? I have performed testing in dense city conditions and going over 500 meters is an exception. If there is LOS – yes it works fine for several km , but not in the city.
    Regards,

    Vasil

    • The antenna is on a mountain and dominate all the city, I assume it is a great difference compared to an antenna in the middle of a city. BST antenna is the one provided by kerlink. Node antenna is a standard 868MHz 1/4 wave.

  3. Hey, super cool experiment!
    Have you had a chance to calculate the loss ratio yet? That would be interesting to know as well
    Thanks
    Best regards
    J

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.