Tag Archives: gateway

Kerlink Wirnet iZeptoCell

Posted on by
Reply
Kerlink iZepToCell

The new baby in Kerlink family has arrived, it’s iZeptoCell ! Ok, I’m a bit late to write this blog post and it came alive a couple of months ago. When I say baby, I really mean baby, no due to its age but more related to its size !

This LoRaWan gateway is really small and can take place in any indoor environment looking like a sensor but providing a wide range connectivity for many devices deploy around. This is a really good option to cover a small / medium company floor up to a building.

This gateway exists with an Ethernet connectivity like the one I’m testing and with a Cellular connectivity, something appreciated when corporate IT dislike having devices on the corporate network.

Continue reading →

Deploy Dragino LPS8 (DATAONLY) on Helium

Posted on by
Reply
LPS8

The Dragino LPS8, LoRaWAN gateway is a helium ready device you can add to Helium as a Data-Only. It means it does not participate to PoC but earn HNT for transferring traffic.

It’s not a ready-to-go data-only, so you need to register the hotspot in the helium block-chain on your own but it run the gateway-rs software internally.

This device as been designed for Helium, but not only, it can be connected to TTN or another different network, like a private network. The installation with Helium network is not really complicated but you will need to process some command on a terminal and manipulate wallet-cli.

Continue reading →

Helium solar hotspot (Data-Only) 2021 update

Posted on by
6

In a previous blog post about 18 month ago, I designed my first Low Cost LoRaWAN Solar Gateway. This year, I did some updates to create a new version to support Helium Data-Only Hotspot (basically it works for any LoRaWAN networks like TheThingsNetwork).

In this version, I’m using a RAK wisegate Lite gateway, it is a bit more power consuming than the TTIG but can work on any LoRaWAN network. I’ve also changed the outdoor enclosure to get a larger and single battery.

You will also see that I’ve been updated the monitoring dashboard to get something better and free of charge. Two of them are in production. One is already deployed as an upgrade of the 1st one and the second one is in the testing phase. The First version has been on the field for more than a year. It has been offline about 10 days during that year, due to the weather conditions. This is a service level of 98,29% from its start until now. With the larger battery I’m expecting to resolve some of the small service interruption I’ve issued during last winter.

Continue reading →

Migrate any LoRaWAN gateway to helium network as a Data-Only hotspot

Posted on by
2

Migrating existing LoRaWAN network to Helium or joining Helium for new deployment is accessing to the world largest LoRaWAN network and enable your devices to be deployed in the large covered zone. By doing this you extends the community network and as a counter part getting benefit on future data transfer and immediately get an access to the low cost ecosystem (data transfer, network server, high redundancy network…)

In a previous post I explained how to configure a RAK Wisgate as a Helium Data-Only hotspot. In a such situation your LoRaWAN gateway becomes a hotspot relaying the Helium traffic and getting some little rewards for the data transfer. The more important is to extend the coverage. This way of doing is good but I’ve got some issues on the field: The data transfer from the hotspot to the blockchain (even if just the state channels) is high and the software, currently in alpha, is not totally stable. When deploying a gateway is isolated area to provide new coverage, honestly, these two issues are blocking points.

The second important consideration is the existing gateways, already deployed on the field: they are currently used for private networks. They have been deployed some years ago and are not in the compatibility list of Helium hardware. Even if they are, deploying a new software on them, remotely can be a problem.

For these different reasons, I’ve been investigating a different approach by creating centrally hosted hotspots connected to different LoRaWAN gateways through the legacy Semtech protocol. This is what we are going to detail on this blog-post.

Continue reading →

Helium Data-Only hotspot with RAK WisGate Edge Prime

Posted on by
8
RAK7240

It’s time to extend the Helium network out of the city centers ! Now as most of the Helium Pioneers have stacked a lot of HNT, it is time to reinvest a part of it to grow the attractivity of the network and improve the future value of the token as a consequence. At least it is my point of view on what every Helium participant should start doing. Each hostpot revenue is currently sufficiently high to participate to network extension with Data-Only equipment.

Data Only Hotspot are LongFi (LoRaWan) gateways not doing mining, they are just relaying data and, as a consequence, only earn token for packet transfer. If the network use becomes high, this could be an interesting revenue.

Data Only Hotspot target 2 different use-cases:

  • Low density area, they are the zone where you don’t have a big chance to have many other hotspot around and full hotspot price won’t make it interesting regarding the low chance to get PoC reward. Basically, they are good to deploy in the countryside, mountains … to extend coverage but not expecting high revenue. This is important to do to enable used-cases based on a large coverage for the network.
  • Professional networks. This is the main, short term, interest of Helium Data Only Hotspot. Service providers using LoRaWan are mostly relying on private networks with owned equipment’s. These equipment can be migrated or deployed on the Helium network with Data-Only Hotspot without risk of market shortage, larger reliability and lower cost and lower bandwidth and power consumption than full miners. Service providers get different advantages for doing this: get benefit of the existing Helium coverage worldwide (as primary solution or as a redundancy) and get some income for transferring other LoRaWan communication.

For my first experimentation with Helium Data Only Hotspot, I made the choice of RAK Wisgate Edge Prime because this device is reasonable price for high end experience. It is outdoor, with LTE, supporting PoE under $400. This is really fitting well with the second use-case : professional deployment I noticed above. I will later review the Dragino lower cost gateway for addressing the first use-case.

Continue reading →

RAK Wisgate Egde Light review

Posted on by
8

RAK is one of the most famous LoRaWan gateway manufacturer in the hacker space as they have made HAT for raspberry Pi since a while.

I’m not a big fan of RPI based gateways as I do not want to manage RaspiOS and Rpi hardware and really prefer to have an all in one product well integrated when deploying Gateways. So the Wisgate solution is a better choice in my point of view and it has taken time before I decided to buy one of them.

I’ve bought this one for my next project of LoRaWan solar gateway as I want this one to be fully autonomous, including a 4G connectivity. I have multiple candidate gateways for this like the Kerlink iFemToCell evolution and this Wisgate Edge. The Wisgate price is lower at $249 compared to 325€ for the Kerlink. For this reason, and the fact I already tested the iFemToCell some years ago, my first choice has been on the RAK gateway.

So let’s review this Rak Wisgate gateway !

Continue reading →

LORIX One LoRaWan gateway review

Posted on by
2

Yes, I’ve got one of these LoRaWan light saber I was looking for, since a while! For this I really thank you Wifx who helped me to get one. I know this is really unusual for them to work with blogger, so thank you for your trust. So honestly, even if I’ve been sponsored to get the device, I’m really happy to make that gateway test. As I said this gateway is one of my favorite since a while. The reason are a really compact outdoor design. It makes the difference 😉

I did not made a test previously because this have a cost, about 500€, (549CHF) this not much expensive but a bit high regrading my non-profit activity on TheThingsNetwork local deployment.

Now, I’m done telling you my life, we can see what this gateway is proposing !

Continue reading →

Monitor a gateway connected to The Things Network

Posted on by
4

I’ve published a post in January 2019 on a solution to alarm you TTN gateway. It was based on noc API but these API have been deprecated. It means this solution is not working anymore.

So I’m investigating some new solution: the more relevant is the use of TTN cli solution.

Let’s seen what can we do with this.

Continue reading →