After installing openstack on CentOS with RDO package (installation I recommand as it is really easy) I had some issue with network : the bridges were not connected to the physical network and well configured so I was not able to communicate with any VM created.
Here is how I solved this issue …
A lot of you are coming to my blog for RF433 with Raspberry PI content (here). This article is a small part of a larger project I have. As part of this project I built a Raspberry Pi shield including an RF433 emitter and receiver. I could sell this shield to some of view if it make interest to you. To make it I selected emitters and receivers to get the best quality / price compromise. (read my other articles on this topic) I could sell it around 60€ + port.
Update : chek this article for all informations on the shield and buy it !
RF433 shield for Raspberry PI v0.1
My question to you is : would you be interested in a such thing ?
If yes : leave me a comment with your email address ( I’ll will remove this address before validating it )
RF433 Raspberry PI shield v1.0
Here is the Version 1.0 with antenna connector integrated to PCB.
Following the excellent OpenStack tutorial for OpenSuse you can find here I made some modification to make it works …
It’s not the first time I have some trouble to setup grub2 correctly with my nvidia raid system (also called fake-raid) … I did not find exactly why, but for sure i never try to install grub2 correctly from yast or in manual mode.
The first solution to find was : how to boot a fresh installed system when the bootloader has not been configured. The solution is here : http://www.supergrubdisk.org. This tool is really simple and so efficient to boot ! I recommend to have this in your linux emergency kit !
The second solution, once the system has start is to reinstall a bootloader. Here, in fact the solution is easy : destroy this f**** grub2 and replace it by the legacy really good grub ! lol
Then it works … last step to me: understand why gnome is taking so long to start ?!? or the answer is in the question …
I love Linux !
Recently I made a presentation on Internet of Things for ClermontTech ApiHour show ; normally video should be published soon. For those who are interesting in this topic, here are the slides with the associated comments.
http://slid.es/disk91/internetofthings
Have fun !
Many years ago, I was considering myself as a specialist of Makefiles … But now, I know that Makefile science is not like bicycle and you may loose all this knowledge as soon as you start to java Code …
So I’ve to go back to Makefile school again and here are some of my googling notes on this topic for my own remembers and why not yours !
The last step to use a ATMega328P / Yabbas from the Arduino IDE is to plug it with a FTDI cable (TTL RS232 over USB). Personnally, I’m using the TTL-232R-3V3 to do it. The first step was to create an adaptor to transform this cable output to the YABBAS pinout.
Recently I made a Yabbas arduino system ; this is a low cost arduino (7€) you can DIY. I’ve made it with a group of people from my city (look here) and my daughter. During this session we have finished the prototype but not had the time to flash the AtMega328P.
Now this is done using my Arduino Leonardo as an ISP programmer. I’ll detail the way I’ve done it here